An example of a furnace used for the annealing process is an annealing static furnace. A metal or other material's characteristics can be changed by the heat treatment process called annealing.
Laser welding is a well-established application of many laser technologies. It irradiates the laser beam with high energy density on the two parts of the material, so that the local part is heated and melted, and then cooled and solidified to form a whole. In the process of use, in order to ensure the safety of the operator, we need to master some safe operation rules in the process of operating the laser welding machine. The following will explain to you the safe operating procedures of the laser welding machine
In steel rolling production, the metal billet must be heated to a certain temperature so that it has a certain degree of plasticity in order to be rolled. system. The heating of the metal blank mainly depends on the "heating furnace".
At present, the heating furnaces used in the steel rolling system of iron and steel enterprises are generally two-stage or three-stage heating furnaces, and the movement form of the billet in the furnace is generally a stepping type or a steel pushing type.
Heating furnace refers to the equipment (industrial furnace) that heats materials or workpieces (generally metal) to rolling forging temperature in the metallurgical industry, and can be divided into continuous heating furnace and chamber heating furnace. Heating furnaces are widely used in petroleum, chemical industry, metallurgy, machinery, heat, building materials, electronics, materials, light industry, and many other industries. The steel rolling heating furnace in the metallurgical industry is used to heat the steel parts that need to be rolled. According to different process requirements, it is required to maintain a certain temperature in the steel rolling heating furnace cavity. The temperature is obtained by burning fuel, and the effective combustion of fuel is controlled by the air volume blown by the blower of the heating furnace.
Because of its low speed, low failure rate, cheap price and relatively simple structure, the ejector machine is generally used on cargo three-wheeled motorcycles. The manufacturing structure of the chain machine is relatively complicated, so its engine power is relatively large, and the engine noise is also small, so it is generally used on two-wheeled motorcycles.
