How to clean the engine oil on the chain machine?

There are various methods to clean the engine oil on the chain machine, and the following are some common and effective cleaning methods:

1. Use a combination of dishwashing detergent and toothpaste: Apply dishwashing detergent thickly onto a dry chain, then cover with another layer of toothpaste, and brush evenly with a waste toothbrush. After waiting for 15 minutes, rinse off the dressing with clean water, then use a toothbrush dipped in soap to carefully scrub along the chain pattern until there are no obvious stains. ‌
2. Rinse with hot water: First, wet the chain with a showerhead, spray it with chain cleaner, and let it sit for a few minutes to allow the oil stains to decompose. Then rinse with hot water while rotating the dental disc to ensure that every corner is thoroughly cleaned. Finally, dry it with a hair dryer and apply chain oil to prevent rusting. ‌
3. Use makeup remover oil: Pour makeup remover oil onto the oil stains on dry clothes, rub a few times to dissolve the oil stains. Then rinse with water or clean with other methods, and the chain will be refreshed. ‌
4. Using gasoline or solvents: You can apply gasoline to the oil stain, gently wipe it, wait for the gasoline to evaporate, and then clean it with laundry detergent water. But this method is not environmentally friendly and has a strong taste, so it is not recommended. ‌
5. Use specialized chain cleaner: There are specialized chain cleaners on the market, just use them according to the product instructions. Usually, after applying cleaning agent to the chain, let it stand for a moment and then brush it with a brush. ‌

Attention:

During the cleaning process, avoid splashing cleaning agents or solvents onto sensitive areas such as the skin and eyes.

After cleaning, ensure that the chain is thoroughly dry and apply lubricating oil to maintain its good operating condition.